Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 633)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 631
Via the following commands the preprocessor function blocks can be switched.
G40
It ends the tool radius correction.
G41
It starts the tool radius correction to the left of the work-pieces.
G42
It starts the tool radius correction to the right of the work-pieces.
Allowed syntax
G40
G41 D
G42 D
Parameters of the command
D tool radius
Note: A detailled function description of tool radius correction is located with the
preprocessing function block "SMC_TOOLCORR (FB)“ of the library "The library
SM3_CNC.Library“.
Commands for managing the smooth and round functionaliy
G50
It ends the round-path (SMC_RoundPath) resp. the smooth-path functionality
(SMC_SmoothPath).
G51
It starts the smooth-path functionality.
G52
It starts the round-path functionality.