Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 856)

L-force | PLC Designer
Device Editors
854 DMS 4.1 EN 03/2011 TD29

Configuration
If option 'Show generic device configuration views' is activated, the Configuration
dialog will be available on a tab of the Device dialog (Device Editor). The Device editor
can be opened for the device currently selected in the devices tree via command 'Edit
Object' or by a double-click on the device entry.
The tab is entitled with "<module type> Configuration" (for example "DP-Module
Configuration") and shows the properties of device specific parameters and - if allowed
by the device description - provides the possibility to edit the parameter values.
Abb. 468 Device dialog, Configuration
The following columns are available to describe a parameter:
Parameter: Parameter name, not editable.
Type: Data type of parameter, not editable.
Value: Primarily the default value of the parameter is displayed, directly or by a
symbolic name. If the parameter can be modified (this depends on the definition given
by the device, non-editable parameters are displayed grey-colored), an edit frame an
be opened by a mouse-click on the table field resp. a selection list can be used to
change the value. If the value is a file specification, the standard dialog for opening a
file can be opened by a double-click on the entry and another file can be selected.
Default Value: Default parameter value, not editable.
Unit: Unit of the parameter value, for example "ms" for Milliseconds, not editable.
Description: Short description of the parameter, not editable.