Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 834)

L-force | PLC Designer
General Editors
832 DMS 4.1 EN 03/2011 TD29

The 'Frameselection' field shows the locally available frames and each indented below
the assigned visualizations.
Abb. 451 Frame selection local
Below a frame entry select that visualization which should be displayed on the
respective mouse action in online mode. Click on 'Assign Selection' in order to store
the selection. The current setting then will be displayed in the fields Selected Frame
and Selected Visu.
Any Visualization: All frames + assigned visualizations, which are available in the
whole project can be addressed in the current configuration. In this case the frame and
the visualization also can be defined by a project variables, that is dynamically. The
'Frame and visualization selection' will be done via the following fields and options:
The desired frame element can be defined directly (Assign) or by a variable (Assign
Expr.):
Assign: Direct assignment; if this option is activated, the complete path of the frame
element must be entered. Via button
the input assistant can be used.
Syntax: <device name>.<application name>.<visualization name>.<frame element
name>