Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 121)

L-force | PLC Designer
Concepts and Base Components

DMS 4.1 EN 03/2011 TD29 119
3. Add a Global Network Variable List in the Receiver:
Select 'Application' below device 'Dev_Receiver'. Open the 'Add Object' dialog to add a
global network variables list which will be the complement to the above defined GVL:
Abb. 25 Create GNVL list in receiver device
Enter name "GNVL_Receiver". In field 'Sender' you find a selection list of all GVLs with
network properties currently available in the project. For the current example only
'GVL_Sender' will be offered. (Just for information: If you wanted to use a GVL from
another project, an export file of this list would have to be available, which then could
be imported here via "Import from file")