Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 975)

L-force | PLC Designer
Programming Reference

DMS 4.1 EN 03/2011 TD29 973
• SUPER
• SUB
• TAN
• THEN
• TIME
• TO
• TOD
• TRUE
• TRUNC
• TYPE
• UDINT
• UINT
• ULINT
• UNTIL
• USINT
• VAR
• VAR_ACCESS (only used very specifically, depending on the hardware)
• VAR_CONFIG
• VAR_EXTERNAL
• VAR_GLOBAL
• VAR_IN_OUT
• VAR_INPUT
• VAR_OUTPUT
• VAR_STAT
• VAR_TEMP
• WHILE
• WORD
• WSTRING
• XOR
• XORN
Additionally all conversion operators as listed in the input assistant are handled as
keywords.