Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 495)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 493
Show differences: If you use this button, you will get information on whether the local
object version differs from the latest version in the database. (Currently the differences
will not be shown in detail, but only the information whether the object versions are
different or not.)
After the dialog has been closed with OK the green check in front of the object name in
the Object organizer will be removed, except the option 'Keep checked out' is
activated.
Notice also the dialog 'Pending Checkins' dialog, available for listing and handling the
currently checked-out objects.
12.28.9 Undo Checkout
Symbol:
This command (category Source Control) cancels the Checking out of the object which
is currently marked in the POUs or Devices window.
If you have made any modifications in the local object version, you will be asked
whether you want to get the local version overwritten by the latest database version,
which means that the local modifications would be canceled. The object version in the
database will remain unmodified and the object will be accessible again for other
users. The red cross in front of the object name in the POUs or Devices window will
disappear.
12.28.10 Show Differences
Symbol:
This command (category Source Control) gives information on whether the local
version of the object differs to the database version.
(Currently the differences will not be shown in detail, but only the information
whether the object versions are different or not.)