Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 441)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 439
12.23.6 Options, Features
This subdialog in the Options dialog provides the possibility to adapt the selection of
available features in the currently used programming system environment. In the
upper part you can switch on and off the particular features, in the lower part you can
switch between the predefined sets on a whole.
Note: Some settings restrict the selection of object types that can be newly created
in a project. However, if the user opens a project that already contains objects of
currently not insertable types, these nevertheless will be visible and fully functional.
Abb. 221 Dialog Options, Features
Predefined Features Sets
Currently there are two predefined sets of features, which can be exchanged via
button Predefined Features Sets:
Standard: Some rarely used features are switched off and the user interface is adapted
for most effective usability. Recommended for the majority of users.
Professional: All features are available and the user interface is more complex in order
to unveil all possibilities of the system.