Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 324)

L-force | PLC Designer
Menu Commands sorted by Categories
322 DMS 4.1 EN 03/2011 TD29

See also the notes below this list.
• If libraries are included in the old project, for which up to now no "conversion
mapping" has been stored in the library options, the dialog 'Library Reference
Conversion' will open, where you can define how to convert these references:
Abb. 131 Dialog 'Library Reference Conversion'
(For general information on the library management please see Library Management)
Convert and install the library as well: The referenced library will be converted to the
new format and remain referenced in the project. Thereby it will be automatically
installed and used in the project further on. If the library does not provide the required
Project Information (Title, Version, Company), you will be asked to enter them in dialog
'Enter Project information'. The library by default will be installed in category
'Miscellaneous'.
Use the following library that has already been installed: Activate this option if you
want to replace the currently included library by another one, which is already
installed on the local system. The Browse button opens the Select Library dialog. Here
you can select the desired version of one of the currently installed libraries. This
corresponds to configure the version handling of the library in the Library properties
dialog. "*" means, that the newest library version available on the system will be used
in the project. The list of available libraries is structured like described for the Library
Repository dialog, you can sort by Company and Category.
Ignore the library. The reference will not appear in the converted project.: If this option
is activated, the library reference will be removed and the library will not be included in
the converted project.
Remember this mapping for all future occurrences of that library reference.: If this
option is activated, the current settings of the dialog will be applied also for future
project conversions when the respective library is referenced.