Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 57)

L-force | PLC Designer
Lenze Specific Functions

DMS 4.1 EN 03/2011 TD29 55
2.5 Assigning the transfer of a process image to a task
The transfer of the process image of a device can be assigned to a specific task.
For this purpose, the following input fields are available:
Control level
Bus master level (e.g. EtherCAT master)
If several tasks access the process image of a bus master within a PLC project, the
fastest task always must be entered as the bus cycle task. The bus cycle tasks of the
various bus systems (EtherCAT / CAN / PROFIBUS) can be set independently of each
other.