Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 239)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 237
12.5.6 Check All Pool Objects
This command might be used for test purposes when creating a library project. It
causes a "build" run of all objects currently available in the POUs window. This means
that those will be checked for syntax errors. Notice that no compilation code will be
generated.
12.5.7 Clean
This command (category 'Build') deletes the compile information for the currently
active application. The compile information was created and stored in a file
*.compileinfo in the project directory during the last download of the application.
After a clean process no Online Change will be possible for the respective application.
The program first must be re-downloaded.
12.5.8 Clean all
This command, which by default is part of the 'Build' menu, deletes the compile
information for all applications. The compile information was created and stored in a
file *.compileinfo in the project directory during the last download of the application.
After a clean process no Online Change is possible for the respective application. The
program first must be re-downloaded.
12.6 CAM
The command category 'CAM' provides commands for handling the project file.
12.6.1 CAM Commands
The commands of category 'CAM' are provided by the 'CAM Editor' plug-in, which is
part of »PLC Designer« SoftMotion V3.
By default they can be found under the menu item "CAM". Else you may open the
Customize dialog, category 'CAM', to view or modify the current menu configuration.
The commands:
• write CAM online file
• write CAM data into ASCII table
• read CAM online file
• read CAM data from ASCII table