Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 471)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 469
12.24.4 Print...
Symbol:
This command (category 'Print') serves to print the currently defined part of the project
on a defined printer according to a defined layout.
The standard print dialog will open where you define the desired print range, the
printer properties and number of copies. If option 'Ausgabe in Datei' is activated, you
can define an appropriate file instead of getting an output on a printer.
To define the print page layout use command Page Setup....
When you close the dialog with OK while you are already printing, the printing will
stop after the next page.
12.25 Recipe
This command category provides commands for creating recipe definitions in the
Recipe Manager editor.
12.25.1 Recipe Commands
The 'RecipeManagement Editor' plug-in provides commands of category 'Recipe
commands' for working in the Recipe Manager editor.
These commands are available in the context menu when a recipe definition is
currently opened in an editor window. By default then also the 'Recipe' menu provides
the commands. If applicable, use the Customize dialog to modify the current menu
configuration.
The commands:
• Add a new recipe
• Remove recipes