Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 947)

L-force | PLC Designer
Device Editors

DMS 4.1 EN 03/2011 TD29 945
Drive Control via CAM and Virtual Time Axis
(See the corresponding sample project PLCopenMulti.project)
The following example demonstrates how a periodic CAM can be realized on a linear
drive. Additionally it shows the tappets function.
1. In the device tree create any periodic CAM (named "Example" in the sample project)
which refers to a master axis covering a range between 0 and 10 sec and which at least
contains one inverting tappet with ID1; for example:
Abb. 522 CAM "Example", CAM configuration
Abb. 523 CAM "Example", Tappets configuration