Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 188)

L-force | PLC Designer
Visualization
186 DMS 4.1 EN 03/2011 TD29

Button
A button element can get assigned an image and a defined
button-height.
Image
An image element gets assigned an image by specifying the
image ID and if needed by the name of the image pool where
it is managed. This can be configured dynamically, i.e. via a
project variable. See in this concern: Image pools.
8.19 Visualization elements of type Complex Controls
The category "Complex Controls" of the Visual Editor's toolbox contains the following
elements:
Meter
(not yet
implemented) This element adds a tachometer to the visualization,
the minimum and maximum value of which can be
defined. The position of the needle is then adjusted to
the value of the associated input variable. For
particular value ranges background colors may be
specified.
Bar Display
(not yet
implemented) This element adds a bar display to the visualization,
the minimum and maximum value of which can be
defined. The length of the bar is then adjusted to the
value of the associated input variable. For particular
value ranges separate colors may be specified.
Per default the bar display will be displayed
horizontally; having inserted this element you may
change its orientation in a vertical one within the
element properties.
Trace This element allows to integrate a trace within the
visualization. The trace to be displayed is specified in
the element properties. The configuration of the
variables displayed is done within the configuration of
the trace itself.
On the basis of examples you will find the elements explained when following the
associated link:
• Meter
• Bar Display
• Trace