Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 467)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 465
Columns: Number of columns, if the number is increased, the additional columns will
be inserted right to the existing one(s).
Format of the selected cell:
Select the cell to be configured by a mouse-click in the layout field in the lower part of
the dialog.
Horizontal alignment: Choose whether the content of the currently selected cell
horizontally should be aligned right, center or left. Default: Center.
Vertical alignment: Choose whether the content of the currently selected cell vertically
should be aligned with the top, center or bottom. Default: Center.
Orientation: Enter the number of degrees to which the content of the currently
selected cell should be rotated around its base, whereby the "base" is determined by
the horizontal alignment (for example alignment = left -> the text or picture will be
rotated around its leftmost, vertically centered point). The rotation always is counter-
clockwise, valid values are 0-359. Default: 0.
Row spanning: Enter the number of rows which should be merged to a single one in
the current column. Example: If you enter "3" the currently selected cell will be merged
with the two cells below. Default: 1.
Column spanning: Enter the number of columns which should be merged to a single
one in the current row. Example: If you enter "3" the currently selected cell will be
merged with the two cells to its right. Default: 1.
Width: If this option is deactivated, all columns automatically get the same width and
the sum of the column widths corresponds to the currently set page width. If you want
to change the width for a particular column, select any cell of that column, activate the
Width option and enter the desired width in cm resp. in percents of the complete
header resp. footer width.
Height: Defines the height of the row, where currently any cell is selected, in
centimeters. Default: 0,5.
Font: The name and size of the font, currently defined for the text content of the
selected cell, is displayed. To modify the font parameters use the standard font
configuration dialog which can be opened by button
.
Left edge, Top edge, Right edge, Bottom edge: Here the visibility, color and line width
of the borders of the currently selected cell are defined. By default they are black and
have a width of 0,5 points. Also by default in headers the bottom edge, in footers the
top edge are activated, that is set visible.
Fill: If this option is activated, a fill color for the currently selected cell can be chosen
from the selection list. By default a cell is not filled.
Wrap lines: If this option is activated, the contents of the currently selected cell will be
wrapped at the end of a line if they exceed the cell width. Per default the option is not
activated, that is the contents will be cut by the cell borders.
Content of the selected cell(s):
The currently selected cell is can be filled with text or a picture. Activate the desired
option.