Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 203)

L-force | PLC Designer
Visualization

DMS 4.1 EN 03/2011 TD29 201
Beside some basic properties like for example size, position or line width of the table
you may adjust a multitude of table specific properties a selection of which shall be
studied enlarging the example arrStruct. The effect of the different properties are
shown step by step in the table below.
First of all we change the standard entries in the
column headers into more significant titles, adjust
the width of the columns and determine the
alignment of the titles in the header; for example
for the first column
There are two ways to change the column width: 1.
In the element properties enter the desired value
for"Column width", or 2. Directly In the header line
of the table element perform a mouse-click on the
dvider between two columns and draw it to the
desired position.
We set the height of the rows to 20 pixels and
switch off the row header, so that the first column
displaying the indices of the array is missing now.
The picture at right also shows the enlarged width
("Scrollbar size") of the scrollbar that appears as
soon as the size of the table element is shrunk
down under the sum of row heights resp. column
widths.