Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 668)

L-force | PLC Designer
General Editors
666 DMS 4.1 EN 03/2011 TD29

Example:
The devices tree currently contains three Device entries: Device1, Device2, MyPlc.
Application App1 below MyPlc wants to use the data of Device1 and Device2. So below
App1 first enter a data server object and below that a data source object. Choose data
source type '3S PLC" in the Add Object dialog. Device1/Application<xy> and
Device2/Application<xy> will be offered. Choose the application of Device2, enter
Name "DataSource_Dev1" resp. "DataSource_Dev2" and close the dialog. The data
source objects will be added in the Devices tree below App1 and now can be
configured.
Abb. 357 Example, data server and data sources
13.5.3 Data Source configuration
The data source objects added to a data server can be configured concerning the
selection of the data items and the communication with the real data source:
Open the configuration dialog via command 'Edit Object' or by a double-click on the
data source object in the devices tree.
The dialog provides two tabs: Data Source Items, Communication.