Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 396)

L-force | PLC Designer
Menu Commands sorted by Categories
394 DMS 4.1 EN 03/2011 TD29

12.22 Online
The command category 'Online' provides commands applicable in online mode.
12.22.1 Online commands - Online Commands
The 'Online Commands' plug-in provides commands of category 'Online' for controlling
the application program on a real or on the simulation target system (device, PLC) after
having logged in.
Most of these commands are by default available in the 'Online' and 'Debug' menus. If
necessary open the Customization dialog to view or modify the menu settings.
When calling the commands, which are marked by a an asterisk * in the list below, the
user will be prompted to confirm. Such a confirmation prompt will additionally appear
for the commands, which are marked by two asterisks ** in the list below, if option
"Secure online mode" is activated in the communication settings of the respective
device.
WARNING!
Extraordinary changes of variable values in an application currently running on a
controller can cause unwanted behaviour of the controlled system.
Evaluate possible dangers before Writing or Forcing of variables and make
appropriate security precautions.
Depending on the controlled system, damages to machines and parts could result,
or even health and life of persons could be endangered.
WARNING!
Online Change modifies the running application program and does not effect a
restart process.
Make sure that the new application code nevertheless will effect the desired
behaviour of the system.
Depending on the controlled system, damages to machines and parts could result,
or even health and life of persons could be endangered.
The commands (* and ** are explained above):
Online menu:
• Login
• Logout
• Create boot application
• Download *
• Online Change *
• Source download to connected device
• Multiple Download **
• Reset warm *
• Reset cold *
• Reset origin *
• Simulation