Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 289)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 287
In case of Shared Memory you may edit its Name. If you want to fix the local address of
the shared memory, you may enter this address in the edit field Forced Address.
Abb. 109 Dialog Gateway - Block drivers (Shared Memory)
Attention: After having finished the configuration in the Gateway dialog (closed
with OK) and a possible modification of the gateway.cfg file the gateway must be
stopped and restarted. Otherwise the changes will not be effective!
12.12.6 Delete selected Device
This command (category Device Communication) removes the currently selected
device from the list in the Communication Settings dialog.