Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 837)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 835
For static definitions (category 'Colors' in the element properties) the color can be
chosen from a selection list or in the color selection dialog (to be opened via button
). Example:
For dynamic definitions (category 'Color variables') a project variable of type DWORD
must be entered in the element properties which provides the color definition:
for example "prog1.dwFillColor".
The variable must define the color value in hexadecimal format. The first two zeros
after "16#" should be set to in each case, to fill the DWORD size.
Example: dwFillColor := 16#
FF 00 FF ;
13.18.6 Visualization Interface Editor
This part of the Visualization editor can be switched on or off via command
'Interface Editor' (by default in the 'Visualization' menu). It will be provided in the
upper part of the Visualization editor as a separate tab besides other additional editors
like for example the Hotkeys Configuration editor or the Element List. editor.
Abb. 454 Visualization Interface Editor, example