L-force | plc designer – Lenze PLC Designer PLC Designer (R3-1) User Manual
Page 649
Advertising
L-force | PLC Designer
General Editors
DMS 4.1 EN 03/2011 TD29
647
The control panel provides the following commands:
Zoom in.
Zoom out.
Change the camera's pitch .
Change the camera's pitch.
Change the camera's yaw clockwise.
Change the camera's yaw counter-clockwise.
Roll the camera clockwise.
Roll the camera counter-clockwise.
Set view direction to negative z-axis and rescale.
Set view direction to x-axis and rescale.
Set view direction to y-axis and rescale.
Advertising