Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 946)

L-force | PLC Designer
Device Editors
944 DMS 4.1 EN 03/2011 TD29

Additionally we create an operation visualization. We use the visualization templates
provided by the libraries and via the frame concept we connect them with the function
block instances:
Abb. 521 Visualization, frames with visualization templates
Now we can compile the project without errors, then log in to the controller and start
the application. By activating input 'Execute' of MoveVelocity the drive will start
rotating. Activating 'Execute' of MoveAbsolute will position the drive to the set
position, whereby it will be rotated in positive direction, according to the setting
Direction: positive. This will cause an interrupt of module MoveVelocity.
Play with the modules by direct editing the modules within the visualisation: test
various velocities and accelerations and also test the direction modes
(positive/negative/current/shortest/fastest) of MoveAbsolute.