Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 891)

L-force | PLC Designer
Device Editors

DMS 4.1 EN 03/2011 TD29 889
Jump to line if error and Next line: If an error was detected, the transfer will be
continued with the SDO specified in the line which is entered in field 'Next line' (line
number, the line numbers are displayed in the Line column)
Abb. 491 Configure error handling, example
To modify the parameters of a SDO, which is already listed in the SDO configuration
table, use button Edit... to get the Select item from object dictionary dialog where you
can edit as described above for adding a SDO.
Button Delete... will remove the currently selected entry.
CANopen Configuration
In this dialog of a CANopen device configuration the parameters as described in the
EDS-file are listed and their values might be modified by editing the respective field.
This is the standard Device Editor dialog for parameters of a device.
Abb. 492 CANopen Configuration dialog