Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 344)

L-force | PLC Designer
Menu Commands sorted by Categories
342 DMS 4.1 EN 03/2011 TD29

By a click on the cursor jumps to the next unit of the device tree, which shows
differences.
By a click on the cursor jumps to the precedent unit showing differences.
By use of
the version of a block contained in the reference project will be
accepted for the actual project as well. The direction of the acceptance goes from the
reference project to the actual project, not vice versa.
In the detailed view (see above, first item of this list) a block consists of the entity (line,
network, element) the cursor is actually placed on as well as of all cohering entities,
which have the same sort of difference marking (for example subsequent lines). After
accepting a block within the detailed comparison view the block will appear
highlighted yellow in the actual version.
In the survey view however, a block consists of the unit the cursor is actually placed on
as well as of all subordinated units. Having accepted a changed block within the survey
view will highlight the associated units of the actual project in yellow and add a check
mark to them. Accepting a block newly inserted in the actual version will delete it
(marked by a small red cross in addition), whereas accepting a block deleted in the
actual version will reinsert it into the actual version (marked by a small green plus in
addition). Single parts of a block can again be inserted respectively deleted by use of
the command
. By entering a unit hereunto you will be asked if you want
to commit these changes to the detailed view.
A repeated click on
cancels the changes made during its last execution.
By use of the unit (survey view) or entity (detailed view, see above, first
item of this list) the cursor is actually placed on will be accepted in the version
contained in the reference project for the actual project also. The direction of the
acceptance goes from the reference project to the actual project, not vice versa.
After accepting an entity within the detailed comparison view the entity will appear
highlighted yellow in the actual version. When returning to the survey view you are
asked if you want to commit the changes made. If the two versions are identical
hereafter, they will now be displayed in regular black in the survey.
However, having accepted a single unit within the survey view will highlight in yellow
its name in the actual project as well as the name of all other units the specified unit is
depending on. In addition a check mark will appear subsequent to their names.
Accepting a unit newly inserted unit in the actual version will delete itself and all
subordinated units and mark the corresponding lines by a small red cross in addition.
Though, accepting a unit deleted in the actual version will reinsert itself and all other
units the specified one is depending on into the actual version and mark their names
by a small green plus in addition. By entering a unit (see above, first item of this list)
you will be asked if you want to commit these changes to the detailed view.
A repeated click on
cancels the changes made during its last execution.