Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 823)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 821
* "OnMouse..."- after-actions:
One or several of the after-actions described in the following can be defined for a
certain action (OnMouse..., tap, toggle) on a visualization element. This is to be done in
dialog 'Input Configuration', which will open on a mouse-click on the 'value' field
("Configure...").
Abb. 442 Input Configuration dialog
In the left part of the dialog see in the title bar the name of the currently configured
OnMouse-action. In the field below the possible after-actions are listed. In the center
part see the after-actions already assigned to the OnMouse-action. The right part
always provides the appropriate configuration options for the action which is currently
selected in the center part.
In order to define one or several after-actions for the current mouse-action, select the
after-action from the left field and use the right-arrow-button for copying it to the
center part. Then select the action in the center part and fill the configuration fields in
the right part. The left-arrow-button allows to remove an action which is currently
selected in the center part.