Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 792)

L-force | PLC Designer
General Editors
790 DMS 4.1 EN 03/2011 TD29

Grid: If this option is activated a grid will be displayed. The major ticks will be
elongated by dotted lines for this purpose. The color of the grid lines can be chosen
from the color selection list.
Description: If this option is activated, the text entered in the edit field will be
displayed at the upper end of the y-axis. For the x-axis no description will be displayed
here.
Font: This button opens the standard dialog for defining the font for the trace display.
Backcolor: From the given color selection list choose the background color for the
coordinate system which should be used as long as this is not selected in the trace
window.
Backcolor on Selection: From the given color selection list choose the background color
for the coordinate system which should be used as long as this is selected in the trace
window.
Refresh Rate (ms): Time interval in milliseconds, in which the update of the trace
window in online mode will be done. Default: 500ms.
Maximum number or recorded values: Maximum number of values which can be
written to the »PLC Designer« trace ring buffer. Default: 10000. When the buffer is full,
the contained values will be overwritten starting at the "oldest" ones.
Reset: With this command the appearance is set to its default value.
Use as default: With this command the current appearance is set as default. They are
used when a new trace or variable is configured.