Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 228)

L-force | PLC Designer
Menu Commands sorted by Categories
226 DMS 4.1 EN 03/2011 TD29

Location
Abb. 70 New Breakpoint' dialog, Location
POU: The selection list offers all POUs currently available in the project. Select that one
where you want to set a breakpoint
Position: The selection list offers all possible breakpoint positions of the currently
selected POU. Depending on the editor type these positions are defined by
Line+Column numbers (text editors) or as Network or Element numbers (graphic
editors). In case of a function block additionally "(Impl)" will be added and you have to
decide whether the breakpoint should be set in the implementation or in an instance.
If it should be set in the implementation, leave option 'Instance Path' deactivated. If it
should be set in an instance, activate option 'Instance Path' to select the desired
instance; see the following:
Instance Path: If the currently selected POU is a function block and this option is
deactivated, the breakpoint will be set in the implementation body of the POU (see
above, Position). If you want to set the breakpoint in an instance, activate the option
and select the desired instance.