Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 716)

L-force | PLC Designer
General Editors
714 DMS 4.1 EN 03/2011 TD29

The buttons and commands in the editor window
The following commands, which are provided in the window when one or several
libraries are selected, correspond to those of the 'Libraries' menu, which by default is
available in the menu bar as long as the Library Manager editor is active:
Add library... for including a library into the current project; precondition: the library
must be installed on the system
Properties. for settings on the namespace and - with notice that the library will later
be available as a "referenced library" in another project - for settings on version
handling, visibility and accessing.
Remove library: The library currently selected in the libraries list will be removed from
the project.
Library Repository.... for defining library locations and for installing or uninstalling
libraries.
The user will be notified if trying to insert a library which is already available in the
project.
13.10.2 Libraries menu
When the Library Manager is active, the menu bar by default provides the 'Libraries'
menu, containing the commands for the Library Manager dialog.
Notice also the Library Repository... command, which is by default in the Tools menu.
13.11 Network Variables List Editor
The NVL Editor is a declaration editor for editing Network Variables Lists. It is working
according to the options currently set for a text editor and in online mode also
appearing like described for the declaration editor. The declaration must start with
"VAR_GLOBAL" and end with "END_VAR". These keywords are provided automatically.
In between enter valid declarations of global variables.
Abb. 396 NVL Editor