Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 847)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 845
13.19.1 Target-Visualization Editor
The TargetVisualization object inserted below the Visualization Manager object
contains the settings for the Target-Visualization. They can be modified in the editor
window which opens on a double-click on the object.
Abb. 462 Target-Visualization Editor
Note the preconditions for running a Target-Visualization described on the Target-
Visualization help page.
Start Visualization: Name of the visualization to be displayed automatically as target
visualization, when the target system starts running. By default "Visualization" is
entered here. To set another visualization you might use the Input Assistant offering
the currently available visualizations.
Best Fit:
Best fit in online mode: If this option is not activated, the visualization will be
displayed on the target visualization screen in exactly that size that it is defined in the
visualization object properties. If the option is activated, the target visualization
display will be adapted according to the following settings:
Use automatic detected client size: The target visualization will fill the client screen.
Use specified client size: The visualization will fill the screen area defined by:
Client width: Width in pixels
Client height: Height in pixels