Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 447)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 445
12.23.9 Options SFC
This sub-dialog of the options dialog provides the possibility to set default settings for
SFC objects. Each new SFC object will get these defaults in its Properties.
Note: Notice that any modifications in the default settings will not be applied to
existing SFC objects until you use the 'Set defaults' button in the SFC Settings
(Properties) of the particular object. The object properties have higher priority than
the defaults.
Notice also that the pure editor options, that is settings for layout and view are
handled in a separate options dialog.
Build
Abb. 227 SFC Options dialog, category 'Build'
SFC library:
Here the SFC library, which should be used by default, is defined by Company, Title,
Version as defined in the Project Settings of the library. A Namespace can be specified
in order to uniquely address the library. This might be necessary if different versions of
the library are available on the system. Concerning namespace always keep aware,
that there is no mismatch between a namespace defined in the Library Manager and
the one specified for the particular object.
The default settings are those of the SfcIec.library provided with the standard profile.