Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 843)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 841
The elements are listed top down according to their position on the Z-axis of the
visualization area, the back-most in the first line. The following values are displayed,
but cannot be edited here:
Type: Element type and icon as used in the toolbox, and element number initially
resulting from the sequence of inserting
X, Y: Position of the upper left corner of the element; (0,0 = upper left corner of the
visualization area)
ID: Internally assigned element identifier
Name. Element name as defined in the element Properties (Elementname)
Element(s) can be selected by selecting the respective row(s), whereby the selection
always will be synchronized with that in the main visualization editor. Regard however
that subelements of a group can only be selected here in the element list.
The position of a selected element on the Z-axis, that is on the background-foreground
axis, can be modified by using the following commands:
• Bring to Front
• Bring one to Front
• Send to Back
• Send one to Back
The following commands can be used in order to restore any edit actions in the
element list or to remove elements:
• Undo
• Redo
• Delete