Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 828)

L-force | PLC Designer
General Editors
826 DMS 4.1 EN 03/2011 TD29

Later in online mode, when the user input will be performed on the visualization
element, the configured commands will be executed in that order in which they are
arranged here in the table from up to down. You can change this order by shifting a
currently selected entry by the buttons or .
The following commands are available:
Execute program on the PLC
Executes the given program on the controller (PLC) resp. the
visualization client.
1st parameter: STRING, path of the program (for example
"C:\programs\notepad.exe"
2nd parameter: STRING, arguments needed by the program (for
example name of file to be opened: "copyfile.txt")
Execute program on the client
Print
The standard Print dialog gets opened, where settings for the print
area, the printer parameters etc. can be configured and a printout of
the current visualization can be generated.
For the following commands concerning recipes notice the following:
The "recipe definition" is an object in the devices tree below the Recipe Manager. It consists of a list of
variables and the recipes defined for these variables (that is variables values). It can be edited in the
Recipe Manager editor window.
The "recipe name" is the name of a particular recipe for the variables within a recipe definition. The recipe
names are there visible as column headers.
Recipe definition, Recipe name
Create recipe A new recipe will be created in the specified recipe definition.
1st parameter: Recipe definition name
2nd parameter: Name for new recipe
Delete recipe
The specified recipe will be removed from the specified recipe
definition.
1st parameter: Recipe definition name
2nd parameter: Recipe name