Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 857)

L-force | PLC Designer
Device Editors

DMS 4.1 EN 03/2011 TD29 855
Applications
This dialog is provided on a tab of the Device dialog (Device Editor), which can be
opened via command 'Edit Object' or by a double-click on the device object entry in the
Devices window. It serves to scan and to remove applications on the PLC.
Abb. 469 Device dialog, Application
Applications on the PLC: List of the names of applications which have been found on
the PLC during the last scan.
Refresh List: The PLC will be scanned for applications, the list will be updated.
Remove resp. Remove All: The application currently selected in the list resp. all
applications will be removed from the PLC.