Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 842)

L-force | PLC Designer
General Editors
840 DMS 4.1 EN 03/2011 TD29

Element ID: ID of the visualization element the Key is assigned to (via the "Hotkey"
Property). Unique identifier within the current visualization.
If a key is associated with several actions, these will be executed in the same order as
they are listed top down here in the configuration table. You might change this order
by selecting a key definition (click on the table row) and using the arrow buttons right
to the table to move the entry up or down.
Note: It is defined by the device description, which keys are supported in a
visualization running on that device!
Regard the following sequence of calls
when processing key actions:
1. Eventhandler of the application, if activated (optional); e.g. g_VisuEventManager
)
2. Key configuration valid for all visualizations of the application, in the visualization
manager
3. Standard keyboard usage definition
4. Special key configurations of the particular visualizations (as handled by the Hotkeys
Configuration editor), whereby main visualizations will be regarded before those
which are contained in frames.
13.18.8 Element List Editor
This part of the Visualization Editor provides a list of the visualization elements of the
currently opened visualization.
The Element List can be opened via the Element List command (per default in the
Visualization menu) and then will be available as a separate tab besides the Interface
Editor and other editors in the upper part of the visualization.
Abb. 458 Element List